How to enable the tip guide

This article applies to the Ingenico iCT 220, iCT 250, iWL 220, and iWL 250 terminals.

Note: This article covers enabling the Tip Guide with the default options of 10%, 15%, and 20%. For information on how to edit these options, refer to How to edit the tip guide.

To enable the tip prompt, complete the following:

1. Press the # key.

2. Select Setup Menu > Trans Options > Tip Options.

3. Select Tip Guide > Tip Guide > Display.

4. Press the red key until you are back at the home screen.

Note: If you make any changes to your Ingenico terminal, email Zomaron will update your files so that any updates pushed to the terminal in the future retain this change.